Environmental conditions, Standards | Bosch Appliances V1.0 specification

52 en Technical DataPLENA matrix

11.3	Environmental conditions
11.3.1	DSP Matrix Mixer

	Operating temperature	-10 ºC to +45 ºC

	Storage temperature	-40 ºC to +70 ºC

	Relative humidity	<95%

11.3.2Multi Channel DSP Amplifier

	Operating temperature	-10 ºC to +45 ºC

	Storage temperature	-40 ºC to +70 ºC

	Relative humidity	<95%

11.3.3	Call Station

	Operating temperature	-10 ºC to +45 ºC

	Storage temperature	-40 ºC to +70 ºC

	Relative humidity	<95%

11.3.4	Wall Control Panel

	Operating temperature	-10 ºC to +45 ºC

	Storage temperature	-40 ºC to +70 ºC

	Relative humidity	<95%

11.4 Standards

EMC emission

EMC immunity

According to EN55103-1

According to EN55103-2

2013-06 V1.0

Operation manual

Bosch Security Systems B.V.

Image 52

Bosch Appliances V1.0 Environmental conditions, Standards, DSP Matrix Mixer, Call Station, Wall Control Panel

Contents

Plena matrix Page Table of contents Maintenance TroubleshootingTechnical Data 1Safety Safety precautions1FCC and Ices Business Equipment For commercial or professional use En Safety Plena matrix About this manual Document history Release date Documentation version Reason 3System overview PLM-4P125 and PLM‑4P220 Multi channel DSP Amplifiers PLM‑8CS 8 Zone Call Station PC Configuration and User GUIPLM‑WCP Wall Control Panel Plena matrix System overview en 4Planning 5Installation DSP Matrix Mixer and Amplifiers Call Station Refer to Wall Control Panel DIP switch settings, 3Wall Control Panel PC GUI application software installation PC GUI softwarePC requirements See also 5iOS GUI software Wall Control Panel ConnectionsDescription Multi channel DSP Amplifier Number Description Number Description Do not connect any device, other than a PLM‑4Px2x amplifier 4DSP Matrix MixerPanels DSP Matrix Mixer and Amplifiers, Call Station DIP switch settings 7ConfigurationCall station ID numbers DIP switch Wall Control Panel DIP switch settings 3Multi Channel DSP Amplifier settings 4DSP matrix mixer PC GUI Proceed as follows DSP matrix mixer PC GUI control functions User DSP matrix mixer GUI main screen Other DSP matrix mixer configurations in the GUI DSP setupMulti Channel DSP Amplifier PC GUI Plena matrix Configuration en Amplifier GUI main screen Amplifier Bridging Configuration 1Start 8OperationContinue with one of the following chapters 2Call Station Continue with Pre-settings and selections Making an announcement Top LED 0dB attenuation Adjust the audio output volume level Select the input source Standalone without connection to the PC GUI With DSP / PC GUI functionality Activate the amplifier auto standby Activate the active override audio input function3Operate the amplifier with the PC GUI 5DSP Matrix Mixer RS485 LED Activate the Alert/EVAC override function 1Activate the override input function3Operating the DSP Matrix Mixer/system with the GUI Troubleshooting Problem Possible cause Possible solution DSP matrix mixer or Problem Possible cause Possible solution Call stations / Wall Control Call station’s microphone 1Customer service Maintenance 10.1 Clean the units10.2 Clean air vents 10.3 Check the connectors and grounding 11.1 Electrical Technical DataDSP Matrix Mixer Multi Channel DSP Amplifier Logic inputs8CS and WCP RS485 Amplifier Connectors Call Station 11.1.4 Wall Control Panel 11.2.1 DSP Matrix Mixer 11.2 Mechanical11.2.3 Call Station 11.2.4 Wall Control Panel 11.3 Environmental conditions Standards11.3.1 DSP Matrix Mixer 11.3.3 Call StationPage Bosch Security Systems B.V