Document history | Bosch Appliances V1.0 specs

8 en About this manualPLENA matrix

2.6	Document history

	Release date	Documentation version	Reason

	2013.06.18	V1.0	– 1st Edition.

2013-06 V1.0

Operation manual

Bosch Security Systems B.V.

Image 8

Bosch Appliances V1.0 operation manual Document history, Release date Documentation version Reason

Contents

Plena matrix Page Table of contents Technical Data TroubleshootingMaintenance 1Safety Safety precautions1FCC and Ices Business Equipment For commercial or professional use En Safety Plena matrix About this manual Document history Release date Documentation version Reason 3System overview PLM-4P125 and PLM‑4P220 Multi channel DSP Amplifiers PLM‑WCP Wall Control Panel PC Configuration and User GUIPLM‑8CS 8 Zone Call Station Plena matrix System overview en 4Planning 5Installation DSP Matrix Mixer and Amplifiers Call Station Refer to Wall Control Panel DIP switch settings, 3Wall Control Panel PC GUI application software installation PC GUI softwarePC requirements See also 5iOS GUI software Description ConnectionsWall Control Panel Multi channel DSP Amplifier Number Description Number Description Panels 4DSP Matrix MixerDo not connect any device, other than a PLM‑4Px2x amplifier DSP Matrix Mixer and Amplifiers, Call station ID numbers DIP switch 7ConfigurationCall Station DIP switch settings Wall Control Panel DIP switch settings 3Multi Channel DSP Amplifier settings 4DSP matrix mixer PC GUI Proceed as follows DSP matrix mixer PC GUI control functions User DSP matrix mixer GUI main screen Multi Channel DSP Amplifier PC GUI DSP setupOther DSP matrix mixer configurations in the GUI Plena matrix Configuration en Amplifier GUI main screen Amplifier Bridging Configuration Continue with one of the following chapters 8Operation1Start 2Call Station Continue with Pre-settings and selections Making an announcement Top LED 0dB attenuation Adjust the audio output volume level Select the input source Standalone without connection to the PC GUI With DSP / PC GUI functionality 3Operate the amplifier with the PC GUI Activate the active override audio input functionActivate the amplifier auto standby 5DSP Matrix Mixer RS485 LED 3Operating the DSP Matrix Mixer/system with the GUI 1Activate the override input functionActivate the Alert/EVAC override function Troubleshooting Problem Possible cause Possible solution DSP matrix mixer or Problem Possible cause Possible solution Call stations / Wall Control Call station’s microphone 1Customer service Maintenance 10.1 Clean the units10.2 Clean air vents 10.3 Check the connectors and grounding DSP Matrix Mixer Technical Data11.1 Electrical Multi Channel DSP Amplifier Logic inputs8CS and WCP RS485 Amplifier Connectors Call Station 11.1.4 Wall Control Panel 11.2.3 Call Station 11.2 Mechanical11.2.1 DSP Matrix Mixer 11.2.4 Wall Control Panel 11.3 Environmental conditions Standards11.3.1 DSP Matrix Mixer 11.3.3 Call StationPage Bosch Security Systems B.V