Installation
Hardware and software installation procedures are described in the following chapters.
Before installing the rack mounted products:
1. Set the mains power switch on the unit’s rear panel to the off position:
– The DSP matrix mixer unit and multi channel DSP amplifier operates on AC mains
voltage ranging from 100‑240VAC, 50‑60Hz.

DSP Matrix Mixer and Amplifiers

The DSP matrix mixer and the multi channel DSP amplifiers are designed for installation into a
19" rack. For 19" rack installation; use:
– The 19" rack mounting brackets which come with the product.
– Standard M6 mounting screws: 16 mm thread depth, 20 mm total length.
Figure 5.1: 19” bracket and rack mounting
Notice!
If you install the product into a 19” rack:
- Ensure that it does not exceed the overheating temperature (+45°C ambient).
- Use the included Bosch 19” mounting brackets.
5

5.1

PLENA matrix Installation | en 13
Bosch Security Systems B.V. Operation manual 2013-06 | V1.0 |