20 en ConnectionsPLENA matrix
Number | Item | Description | ||
|
|
|
| |
10 | Active | – | Contact closure to activate the “Override input”: | |
|
|
| – | Use the 0 VDC from the sensor above as the common. |
|
|
|
| |
11 | Network | – | RJ45 Ethernet communication socket: | |
|
|
| – | Communication with the PLENA matrix GUI application. |
|
|
|
|
|
Warning!
!The 12V DC power output (Auto Standby) connection should be only connected with products in accordance with recommendations outlined in this manual.
Notice!
Recommended motion sensors for use with the auto standby mode are the Bosch range of sensors.
For more information regarding Bosch security products contact your local Bosch Security certified partner or go to www.boschsecurity.com for details.
Notice!
It is recommended that the cable used Amp Link cable is a high quality STP CAT‑5 (e) cable. Amp Link cable distances should not exceed 5 meters per cable.
Operation manual | Bosch Security Systems B.V. |
