
PLENA matrixConfiguration en 25
7.3Multi Channel DSP Amplifier settings
The multi channel DSP amplifier does not require an ID to be connected to the DSP matrix mixer. Amplifier settings that are configured by DIP switches are; input sensitivity and bridging channels together. The DSP features are only able to be configured, after you have connected to the unit using the PC software GUI. Refer to; Multi Channel DSP Amplifier PC GUI, page 28).
Some amplifier settings are configured by DIP switches; such as, the input sensitivity and when bridging channels together.
1/2 | 3 | 4 | 5(4x) | 6(4x) |
| POWER | Output 1 | |
|
|
| |
|
|
| 0 4Ω 8Ω 70V 100V |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Output 3
0 4Ω 8Ω 70V 100V
Output 2
0 4Ω 8Ω 70V 100V
Output 4
0 4Ω 8Ω 70V 100V
Input 1
Input 2 Sens
Bridge 1+2
Input 1 Sens
Input 1
Link 1 Link 2
Input 2 | Input 3 |
| Link 3 | Link 4 |
|
|
Input 2 | Input 3 |
| Input 4 | |
Input3 Sens Bridge3+4 Input4 Sens | +12V DC | 0V DC Sensor + | Sensor - |
|
|
| Link/Act | 100Mbps | |
| Input 4 |
| Active |
|
| Override |
| ||
| Amp Link Input |
|
| Network |
|
| 12(4x) | 13 | 14 | 7 | 8 9 10 | 11 |
|
|
|
|
|
|
|
|
Number | Item | Description |
|
|
|
|
|
|
|
|
|
|
|
| |
12 | Line input | – 4 x audio input |
|
|
|
| |
| control | – The range of attenuation is approximately between 0dB and >50dB. |
| ||||
|
|
|
| ||||
13 | Input | – 3‑way DIP switch for input level sensitivity and bridge mode setting: |
| ||||
| sensitivity / | – Switch 1: Input Sensitivity Channel X: 6.15V (UP) / 1.22V (DOWN) input | |||||
| bridge (input 1 | sensitivity. Default: DOWN. |
|
|
|
|
|
| and 2 shown) | – Switch 2: Bridge Channels | |||||
|
| Default: DOWN. |
|
|
|
|
|
|
| – Switch 3: Input Sensitivity Channel Y: 6.15V (UP) / 1.22V (DOWN) input | |||||
|
| sensitivity. Default: DOWN. |
|
|
|
|
|
|
|
|
| ||||
14 | Input | – 3‑way DIP switch for input level sensitivity and bridge mode setting: |
| ||||
| sensitivity / | – Switch 1: Input Sensitivity Channel X: 6.15V (UP) / 1.22V (DOWN) input | |||||
| bridge (input 3 | sensitivity. Default: DOWN. |
|
|
|
|
|
| and 4 shown) | – Switch 2: Bridge Channels | |||||
|
| Default: DOWN. |
|
|
|
|
|
|
| – Switch 3: Input Sensitivity Channel Y: 6.15V (UP) / 1.22V (DOWN) input | |||||
|
| sensitivity. Default: DOWN. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notice!
Hardware settings cannot be overruled or changed by the GUI configuration software.
See also
–DSP matrix mixer PC GUI, page 26
Bosch Security Systems B.V. | Operation manual |