Safety en 9 | |
|
|
Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic- sensitive printed circuit boards.
Fuse rating - For protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60). Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection, must be in accordance with NEC725 and NEC800 (CEC Rule
Permanently connected equipment - Incorporate a readily- accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near the equipment so that it is easily accessible.
Power resupply - If the unit is forced to power down due to exceeding the specified operating temperatures, disconnect the power cord, wait for at least 30 seconds, and then reconnect the power cord.
Power lines: Do not locate the camera near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights.
Rack mount
–Ventilation - Do not place this unit in a
–Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous condition due to uneven mechanical loading.
Bosch Security Systems, Inc. | User Manual | F.01U.252.635 2.0 2011.09 |
