50 en | |
|
|
NOTICE!
In order to call an action (Preset, Pattern, Tour, or Scan), you must configure Preset, Pattern, Tour, or Scan first.
1.From the MAIN MENU, select DOME MOTION. The submenu DOME MOTION appears.
2.Select HOME ACTION. The screen HOME ACTION SETUP appears.
HOME ACTION SETUP
ACTION
NUMBER
TIME
MODE
SAVE
BACK
3.Select the option "Action."
4.Select the appropriate value:
–Home
–Preset
–Scan
–Tour
5.Select the option "Number."
6.Set the number for the action. For example, if "Action" is "Preset" and "Number" is "001," this means Preset 1.
7.Select the option "Time." This is the dwell time, the amount of time that the joystick controller can be idle before the camera returns to Home, a preset, a scan, or a tour.
8.Set the desired dwell time (from 1 second to 60 seconds and from 1 minute to 60 minutes).
9.Select the option "Mode."
10.Select the appropriate value: Off (Manual) or On (Auto).
11.Save the settings.
F.01U.252.635 2.0 2011.09 | User Manual | Bosch Security Systems, Inc. |
