Bosch Appliances VEZ-400 user manual Pattern Setup

VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu en 53

7.8Pattern Setup

A Pattern is used to display (or recall) a memorized, repeated and serial trace of pan, tilt, and zoom. The camera has a maximum of 8 Patterns in Pelco protocol mode, and 2 Patterns in Bosch protocol mode. Each of the user-defined scans includes Pan/Tilt/Zoom. To set up (program) a Pattern:

1.From the MAIN MENU, select PATTERN SETUP. The screen PATTERN SETUP appears.

PATTERN SETUP

NO.

EDIT

TITLE

TIME

CLEAR

SAVE

BACK

2.Select the option "NO.###" to select a pattern number.

3.Select the appropriate pattern number.

4.Select the option "Edit." A second screen PATTERN SETUP appears.

5.Using the joystick, move to a desired target.

6.Press the button [Near] to begin programming.

7.Using the joystick, record the scene. Note that ’Time’ means recorded time. The maximum amount of time available for recording is 60 seconds.

8.Save the settings.

Note: Select the option "Clear" to delete the pattern.

NOTICE!

You can also edit the Pattern title. Select the option "Title," then edit the title following the steps in Section 7.2.1 Editing Titles, page 32.

Bosch Security Systems, Inc. User Manual F.01U.252.635 2.0 2011.09