EN 106 | Installation and Operating Manual VIP X2 |
|
|
Camera control
Control options for peripherals (for example a pan/tilt head or a dome camera) depend on the type of unit installed and on the configuration of the VIP X2.
If a controllable unit is configured and connected to the VIP X2, the controls for the unit are displayed next to the video image.
–To control a peripheral, click the appropriate controls.
–Move the mouse pointer over the video image. Additional options for control- ling peripherals are displayed with the mouse pointer.
Digital I/O
The alarm icons Input 1 ... Input 4 are for information purposes and indicate the status of an alarm input: When an alarm is triggered the respective icon lights up in green. The unit's configuration determines whether the alarm is displayed, as well as additional details (see Livepage configuration, page 94).
Trigger relay
You can switch a connected unit by means of the relay in the VIP X2 (for example a light or a door opener).
–To activate this, click the icon for the relay next to the video image. The icon will be red when the relay is activated.
Operation | Bosch Security Systems |