VIP X2 Installation and Operating Manual

EN 41

 

 

MPEG-4 encoder

For encoding the video signal you can select two profiles for each encoder (video input) and change the presets for the profiles.

Selecting a profile

You can adapt the MPEG-4 data transmission to the operating environment (for example network structure, bandwidth, data load). To this end, the VIP X2 simultaneously generates two data streams (Dual Streaming) for each video input, which compression settings you can select individually, for example one setting for transmissions to the Internet and one for LAN connections.

Note

You must set the parameters for each camera input and for each stream individually. The names Video 1 and Video 2 correspond to the names of the video inputs on the unit.

Pre-programmed profiles are available, each giving priority to different perspec- tives.

❚Profile 1: Low bandwidth (CIF)

High quality for low bandwidth connections, resolution 352 × 288/240 pixels

❚Profile 2: Low delay (2/3 D1) High quality with low delay, resolution 464 × 576/480 pixels

❚Profile 3: High resolution (4CIF/D1)

High resolution for high bandwidth connections, resolution 704 × 576/480 pixels

❚Profile 4: DSL

For DSL connections at 500 kBit/s, resolution 352 × 288/240 pixels

Bosch Security Systems 2006-12 V2.5

Configuration using a Web browser