EN 72

Installation and Operating Manual VIP X2

 

 

SSL encryption:

SSL encryption can be used to protect data, such as the password, used for connection establishment. If you activate the On option, only encrypted ports are available for the Remote port parameter.

Note

SSL encryption must be activated and configured on both sides of a con- nection. The appropriate certificates must also have been uploaded to the VIP X2 (see page 99).

You can configure and activate encryption for media data (video, audio, meta- data) on the Encryption page (see page 91).

Auto-connect:

Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each restart, after a connection breakdown or after a network failure.

Note

Stream 2 is always transmitted for automatic connections. Bear this fact in mind when assigning the profile (see page 42).

Audio: (audio version only)

Select the option On if you wish to additionally transmit a standalone G.711 encoded audio stream with alarm connections.

Default camera:

Here you can select the camera whose image will be automatically displayed first on the receiver when the alarm connection is made. Depending on the system configuration, the receiver can then select the other cameras as well.

Note

The numbering follows the labeling of the video inputs on the actual unit.

Configuration using a Web browser

Bosch Security Systems 2006-12 V2.5