EN 90 | Installation and Operating Manual VIP X2 |
|
|
Multicast address video 1: / Multicast address video 2:
Enter a valid multicast address for each stream from the relevant encoder (video input) to be operated in multicast mode (duplication of the data streams in the network).
With the setting 0.0.0.0 the encoder for the relevant stream operates in
Note
Duplication of data places a heavy demand on the unit and can lead to impairment of the image quality under certain circumstances.
Port:
Assign a different port to each data stream if there are simultaneous data streams at the same multicast address.
Enter the port address of the required stream here.
Streaming
Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled stream is indicated by a check mark.
Multicast packet TTL:
You can enter a value to specify how long the multicast data packets are active on the network. This value must be greater than one if multicast is to be run via a router.
Configuration using a Web browser | Bosch Security Systems |