EN 56 | Installation and Operating Manual VIP X2 |
|
|
Partitioning
Two partitions can be set up for recordings of the cameras connected to
the VIP X2, in a similar manner to the partitioning often found on computer hard drives. Parameters such as size, quality and type of video recording or compression standard used can be specified for each partition. Modifying these parameters leads to reorganization, during which stored data is lost.
The unit requires a dedicated partition for the recordings of each connected camera. Each partition is linked to its own encoder or camera input: camera input Video In 1 with partition number 01, camera input Video In 2 with partition 02. This assignment cannot be modified. As a result, all numbers are always displayed in the list, regardless of whether a corresponding partition is available or has been deleted. Both potential partitions need to be configured in order to record two cameras. Two partitions are already
All partitions are listed in the table on the page Partitioning together with the number of the video input (Camera), their partition name, alarm tracks, type and size.
In addition, the page provides you with an overview of the drive data; for example total memory and number of partitions created. A pie chart indicates how much memory space is partitioned for recordings.
Configuration using a Web browser | Bosch Security Systems |