EN 44 | Installation and Operating Manual VIP X2 |
|
|
Target data rate:
You can limit the data rate for the VIP X2 to optimize utilization of the bandwidth in your network. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion.
For complex images or frequent changes of image content due to frequent movements, this limit can be temporarily exceeded up to the value you enter in the Max. data rate field.
Encoding interval:
The figure selected here determines the interval at which images are encoded and transmitted. For example, entering 4 means that only every fourth image is encoded, the following three are skipped - this can be particularly advantageous with low bandwidths. The image rate in ips (images per second) is displayed beside the text box.
Video resolution:
Here you can select the desired resolution for the
❚QCIF 176 × 144/120 pixels
❚CIF 352 × 288/240 pixels
❚1/2 D1 352 × 576/480 pixels
❚2CIF 704 × 288/240 pixels
❚4CIF/D1 704 × 576/480 pixels
❚2/3 D1 464 × 576/480 pixels
Default
Click Default to return the profile to the factory default values.
Details
After clicking the Details >> button, further settings for image quality and communication parameters are displayed.
These settings require familiarity with MPEG and video encoding standards. Incorrect settings could result in useless video images.
Configuration using a Web browser | Bosch Security Systems |