VIP X2 Installation and Operating Manual | EN 99 |
|
|
If the operating status LED lights up red, the upload has failed and must be repeated. To perform the upload you must now switch to a special page:
–In the address bar of your browser, enter /main.htm after the IP address of the VIP X2 (for example 192.168.0.30/main.htm).
–Repeat the upload.
Configuration download:
You can save configuration data for the VIP X2 on a computer and then load saved configuration data from a computer to the unit.
–Click the Download button. The computer displays a dialog box.
–Follow the
Configuration upload:
–Enter the full path of the file to upload or click Browse... to select the required file.
–Make certain that the file to be loaded comes from the same device type as the unit you want to reconfigure.
–Next, click Upload to begin transferring the file to the unit. The progress bar allows you to monitor the transfer.
Once the upload is complete the new configuration is activated. The time remaining is shown by the message going to reset Reconnecting in ... seconds . The unit restarts automatically once the upload has successfully com- pleted.
SSL certificate upload:
In order to work with an SSL connection, both sides of the connection must possess the appropriate certificates. You can upload a certificate consisting of one or more files to the VIP X2 here.
Files must be uploaded one at a time.
–Enter the complete path name of the file you wish to upload, or click Browse... to locate the file.
–Click Upload to start the file transfer.
Bosch Security Systems | Configuration using a Web browser |