| VIP X2 Installation and Operating Manual | EN 19 | |
|
|
|
|
| Installation | 4 |
|
Thanks to its
Caution
The unit is intended for use indoors or in housings. Select a suitable location for installation where the unit will not be subjected to conditions of extreme temperature or humidity. The ambient temperature must be between 0 and +40°C (+32 and +104°F); the relative humidity must not exceed 80%.
The unit generates heat during operation, so you should ensure that there is adequate ventilation and enough clearance between the unit and heat- sensitive objects or equipment.
Please ensure the following installation conditions:
❚Do not install the unit close to heaters or other heat sources. Avoid locations exposed to direct sunlight.
❚Allow sufficient space for running cables.
❚Ensure that the unit has adequate ventilation.
❚When making connections, use only the cables supplied or use appropriate cables immune to electromagnetic interference.
❚Position and run all cables so that they are protected from damage, and pro- vide adequate cable strain relief where needed.
❚Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.
Bosch Security Systems | Installation |