VIP X2 Installation and Operating Manual | EN 33 |
|
|
Note
Proper password protection is only guaranteed when all higher authorization levels are also protected with a password. If a live password is assigned for example, a service and a user password must also be set. As a result, you should always assign passwords beginning with the highest authorization level service.
User name:
The VIP X2 operates with three user names: service, user and live, which correspond to different authorization levels.
The service user name is the highest authorization level. After entering the correct password, you can access all the functions of the VIP X2 and change all configuration settings.
The user user name is the middle authorization level. You use it to operate the unit and also to control cameras, but you cannot change the configuration.
The live user name is the lowest authorization level. It can only be used to view the live video image and switch between the different live image displays.
Password:
You can define and change a separate password for each user name if you are logged in as service or if the unit is not password protected.
Enter the password for the selected user name here.
Confirm password:
Enter the new password a second time to eliminate typing mistakes.
Note
The new password is only saved when you click the Set button.
You should therefore click the Set button immediately after entering and confirming a password, even if you also wish to subsequently assign a password to another user name.
Bosch Security Systems | Configuration using a Web browser |