RS-422/RS-485 Interconnections

NOTE: A jumper on the computer’s main logic board needs to be installed on JP1, Pins 2 and 3, in order for the RS-422/RS-485 interface adapter to function properly.

To connect the printer’s RS-232 DB9 interface to a host computer through an RS-422 or an RS-485 interface, an interface adapter is required. Figure 40 illustrates the required cable wiring for interconnecting to the interface adapter’s DB25 female connector.

Figure 40

Bradyprinter 200M-e and 200M-e 300 User’s Guide

101