Brady 200M-e 300 manual Init Flash MEM

Press	Display Shows	Action/Explanation
		Initialize Flash Memory
		CAUTION: Perform this operation only when it is necessary to
		erase all previously stored information from the
		FLASH memory. Press the NEXT/SAVE key to
		bypass this function.
		1. Press the (+) key to select “YES.”
		If your printer is set to require a password, you are now
		prompted to enter the password. Enter the password and
		then press the	NEXT/SAVE key.
		2. The display asks “INITIALIZE FLASH?”. Press the (+) key
		“YES.”
	INIT FLASH MEM	3. The front panel LCD asks “ARE YOU SURE?”.
		4. Press the (+) key “YES” to begin initialization.
			or
		Press the (–) key “NO” to cancel the request
		and return to the “INITIALIZE FLASH” prompt.
		5. Press the SETUP/EXIT key followed by the NEXT/SAVE key.
		If initialization is still in process, the front panel display
		flashes back and forth between the two phrases
		“CHECKING E: MEMORY” and “PRINTER IDLE.”
		When initialization is complete, the printer automatically exits
		the configuration mode and the front panel displays “PRINTER
		READY.”
		NOTE: Depending on the amount of free FLASH memory,
		initialization may take up to one minute to complete.

Bradyprinter 200M-e and 200M-e 300 User’s Guide 49