Brady 200M-e, 200M-e 300 Light, Status, Indication, )URQW￿3DQHO￿/LJKWV￿

)URQW￿3DQHO￿/LJKWV￿

NOTE: If two operating conditions occur simultaneously (for example, one that causes a light to be on constantly and one that causes the same light to flash), the light flashes.

Light	Status		Indication
POWER	Off	The printer is off or power is not applied.
	On	The printer is on.
TAKE LABEL	Off	Normal operation.
	Flashing	(Peel-off mode only.) The label is available. Printing is paused until the
		label is removed.
ERROR	Off	Normal operation — no printer errors.
	Flashing	A printer error exists. Check the display screen for more information.
CHECK	Off	Normal operation — ribbon (if used) is properly loaded.
RIBBON
	On	Printing is paused, the front panel displays a warning message, and the
		PAUSE light is on.
		•	If the printer is in direct thermal mode: Ribbon is loaded.
		•	If the printer is in thermal transfer mode: No ribbon is loaded.
PAPER OUT	Off	Normal operation — media is properly loaded.
	On	No media is under the media sensor. Printing is paused, the display
		shows an error message, and the PAUSE light is on.
PAUSE	Off	Normal operation.
	On	The printer has stopped all printing operations. Either the PAUSE key
		was pressed, a pause command was included in the label format, the
		on-line verifier detected an error, or a printer error was detected. Refer
		to the display screen for more information.
	Off	Normal operation. No data being received or processed.
	On	Data processing or printing is taking place. No data is being received.
DATA
	Flashing	The printer is receiving data from or sending status information to the
		host computer. Flashing slows when the printer cannot accept more
		data, but returns to normal once data is again being received.

26 Bradyprinter 200M-e and 200M-e 300 User’s Guide