Brady 200M-e 300 manual Default Even, Default XON/XOFF, Default None

Press	Display Shows	Action/Explanation
		Setting Parity: Press the (+) or (–) key to display other choices.
		Default: Even
		Selections: Even, odd, none
	PARITY	The parity of the printer must match the parity of the host
		computer for accurate communications to take place. Select the
		parity that matches the one being used by the host computer.
		Setting Stop Bits: Press the (+) or (–) key to display other
		choices.
		Default: 1 stop bit
	STOP BITS	Selections: 1 stop bit, 2 stop bits
		The stop bits of the printer must match the stop bits of the host
		computer for accurate communications to take place. Select the
		stop bits that match the one being used by the host computer.
		Setting Host Handshake: Press the (+) or (–) key to display
		other choices.
		Default: XON/XOFF
	HOST HANDSHAKE	Selections: XON/XOFF, DTR/DSR
		The handshake protocol of the printer must match the handshake
		protocol of the host computer for communications to take place.
		Select the handshake protocol that matches the one being used
		by the host computer.
		Setting Protocol: Press the (+) or (–) key to display other
		choices.
		Default: None
		Selections: None, Zebra, ACK/NACK
		Protocol is a type of error checking system. Depending on the
		selection, an indicator may be sent from the printer to the host
	PROTOCOL	computer signifying that data has been received. Select the
		protocol that is requested by the host computer. For more details,
		contact Technical Support.
		NOTE: “Zebra” is the same as ACK/NACK except that with
		“Zebra” the response messages are sequenced.
		NOTE: If “Zebra” is selected, printer must use “DTR/DSR” host
		handshake protocol.

Bradyprinter 200M-e and 200M-e 300 User’s Guide 53