Brady 200M-e 300 manual 3ULQWLQJ6SHFLILFDWLRQV, 5LEERQ6SHFLILFDWLRQV

3ULQWLQJ￿6SHFLILFDWLRQV

Printing Specifications				200M-e/200M-e 300
Resolution				203 dots/inch (8 dots/mm)/
				300 dots/inch (12 dots/mm)
Dot size (width x length)				0.0049 " x 0.0049" (0.125 x 0.125 mm)/
				0.0033" x 0.0039" (0.84 mm x 0.10 mm)
First dot location measured from inside media edge				0.10" ± 0.035" (2.5 mm ± 0.89 mm)
Maximum print width				4.09" (104 mm)
Print Length		Continuous printing	203 dpi	90" (2337 mm)
(maximum)		(with standard 4 MB
			300 dpi	41" (1041 mm)
		memory)
Media registration	toleration*		Vertical	= ≤ ±0.050" (1.3 mm)
(non-continuous media)
			Horizontal	= ≤ ±0.050" (1.3 mm)
			203 dpi	2.0" (51 mm) through 8.0" (203 mm)
				per second in 1” increments
Programmable print speeds
			300 dpi	2.0" (51 mm) through 8.0" (203 mm)
				per second in 1" increments
		Ladder (rotated)	203 dpi	4.9 mil to 49 mil
		orientation
Bar code modulus			300 dpi	3.9 mil to 39 mil
		Picket fence (non-	203 dpi	4.9 mil to 49 mil
(“X”) dimension
		rotated) orientation
			300 dpi	3.9 mil to 39 mil
Thin film printhead with Element Energy Equalizer (E3)®				Yes

*Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Brady recommends always qualifying any application with thorough testing.

5LEERQ￿6SHFLILFDWLRQV

	Ribbon Specifications			200M-e/200M-e 300
		Ribbon must be wound with the coated side out.
Ribbon width (Brady recommends using ribbon at least as			Minimum	0.79" (20 mm)
wide as the media to protect the printhead from wear.)
			Maximum	4.1" (104 mm)
Standard lengths		2:1 media to ribbon roll ratio		984 ft. (300 m)
		3:1 media to ribbon roll ratio		1476 ft. (450 m)
Ribbon core inside diameter				1.0" (25.4 mm)
Maximum ribbon roll outside diameter				3.2" (81.3 mm)

86 Bradyprinter 200M-e and 200M-e 300 User’s Guide