3RVLWLRQLQJWKH0HGLD6HQVRUV
The correct positioning of the media sensors is important — it can make the difference between a perfect label and a call to Technical Support!
7UDQVPLVVLYH6HQVRU
The web or gap sensor (transmissive sensor) detects the gap between labels.
The transmissive sensor actually consists of two sections: a light source (the lower media sensor) and a light sensor (the upper media sensor). The media passes between the two.
The upper media sensor must be positioned:
•Directly over the hole or notch, or
•Anywhere along the width of the media if there is a gap between labels.
NOTE: If you are using continuous media, position the upper media sensor over the media so that the printer can detect an
10 | Bradyprinter |
