￿ÆÏAO’‹Æˆ‹›€Í￿Ÿ––Ø›‹YAÏ‹Ÿ›

6\VWHP￿&RQVLGHUDWLRQV

NOTE: Your Brady 200M-e or 200M-e 300 printer is equipped with a DB9 serial connector.

,QWHUIDFHV

The method of interfacing this printer to a data source depends on the communication options installed in the printer. The standard interfaces are an RS-232 serial data port and a bi-directional parallel port. The optional ZebraNet PrintServer II enables printers to be connected to 10Base-T Ethernet networks. In addition, the IBM® Twinax or IBM Coax option is available for those applications that require them.

NOTE: RS-422 and RS-485 serial data ports require an adapter for the DB9 serial interface connector. Contact Brady for details.

'DWD￿6SHFLILFDWLRQV

When communicating via an asynchronous serial data port (refer to Figure 12), the baud rate, number of data and stop bits, parity, and handshaking are user selectable. Parity only applies to data transmitted by the printer since the parity of received data is ignored.

Figure 12

Bradyprinter 200M-e and 200M-e 300 User’s Guide

21