CANCEL Key Self Test

This self test prints a listing of the configuration parameters currently stored in the printer’s memory. See Figure 31 (depending on the options ordered, your label may look different).

1.Turn the printer off.

2.Press and hold the CANCEL key while turning on the power.

The configuration may be changed either temporarily (for specific label formats or ribbon and label stock) or permanently (by saving the new parameters in memory). Saving new parameters occurs whenever a calibration procedure is performed. Refer to page 15 for further information about the configuration procedure. Additional Power-Up Self Tests are also performed during the POST for this test.

Figure 31

78

Bradyprinter 200M-e and 200M-e 300 User’s Guide