&OHDQLQJ￿WKH￿6QDS￿3ODWH

Clean the snap plate to remove label adhesive or a label that has adhered to the underside of the snap plate.

Refer to Figure 28.

1.Insert a small-blade screwdriver or similar tool into the loop on the left side of the snap plate. Lift the snap plate.

CAUTION: Take care not to bend, twist, or otherwise deform the loops!

2.Repeat step one on the right side of the snap plate.

3.Remove the snap plate from the printer.

4.Clean the snap plate with cleaning solvent and a soft cloth.

Figure 28

66

Bradyprinter 200M-e and 200M-e 300 User’s Guide