Table 1

 

 

 

Press

Display ShowsAction/Explanation

—

PRINTER READY

Normal printer operation.

 

 

 

 

 

Press the (+) or (–) keys to increase or decrease the print

 

DARKNESS

darkness setting. (You may need to change this setting when you

 

 

print your label.)

 

 

 

 

 

Press the (+) or (–) keys to select tear-off, peel-off, cutter, or

 

PRINT MODE

rewind mode.

 

 

 

 

 

Press the (+) or (–) keys to select continuous or non-continuous

 

MEDIA TYPE

media type. (If you choose continuous media, you must also

 

 

include a label length instruction in your label format.)

 

 

 

 

 

Press the (+) or (–) keys to select transmissive or black mark

 

SENSOR TYPE

sensing mode. Unless your media has black marks on the back,

 

 

leave your printer at the default setting (web).

 

 

 

 

 

Press the (+) or (–) keys to select thermal transfer (if you are using

 

PRINT METHOD

ribbon) or direct thermal (no ribbon).

 

 

 

 

 

Press the (+) or (–) keys to set the value that is closest to, but not

 

MAXIMUM LENGTH

less than, the length of the label you are using.

 

 

 

 

 

Press the (+) or (–) keys to select:

 

SAVE SETTINGS

PERMANENT — saves changes when the power is turned off.

 

 

Press SETUP/EXIT to accept the selection.

 

 

 

—

PRINTER READY

You have exited the configuration mode and are now ready to

 

 

calibrate the printer.

 

 

 

&RQILJXULQJ￿WKH￿6RIWZDUH￿RU￿3ULQWHU￿'ULYHU

Many printer settings may also be controlled by your printer’s driver or label preparation software. Please refer to the driver or software documentation for more information.

16

Bradyprinter 200M-e and 200M-e 300 User’s Guide