Brady 200M-e, 200M-e 300 /ŸØÏ‹›lÍ￿AÃlÍA›cÍ￿c•ØÆÏ–l›Ï, Area, Method, Interval

/ŸØÏ‹›lÍ￿AÃlÍA›cÍ￿c•ØÆÏ–l›Ï

&OHDQLQJ

Table 2 provides a brief cleaning schedule. Specific cleaning procedures are provided on the following pages.

Table 2

Area	Method	Interval
Printhead	Solvent*	Direct thermal print mode:
		After every roll of media (or
Platen roller	Solvent*
		500’/152 m of fanfold media).
Transmissive sensor	Air blow
Black mark sensor	Air blow	Thermal transfer print mode:
Media path	Solvent*	After every roll of ribbon.
Ribbon sensor	Air blow
Label available sensors	Air blow	Monthly
Tear-off/peel-off bar	Solvent*
		As needed
Snap plate	Solvent*
Cutter	Solvent*

* Brady recommends using a solvent containing 90% isopropyl alcohol.

CAUTION: Use only the cleaning agents indicated. Brady Corporation will not be responsible for any other fluids being used on this printer.

Bradyprinter 200M-e and 200M-e 300 User’s Guide 63