FEED Key and PAUSE Key Self Test
1.Turn off the printer.
2.Press and hold the FEED and PAUSE keys while turning on the power.
Performing this self test temporarily resets the printer configuration to the factory default values. These values are active only until power is turned off unless you save them permanently in memory.
Communications Diagnostics Test
This test is controlled from the front panel display. Refer to page 54. A typical printout from this test is shown in Figure 34. Turn off the power to exit this self test.
NOTE: This label is inverted when printed.
Figure 34
Additional Printer Diagnostics
Additional diagnostic tests are available for this printer, however, they are beyond the scope of this user’s guide. Refer to the maintenance manual for information about these additional tests.
Bradyprinter | 81 |