5ROO0HGLD/RDGLQJ
NOTE: A calibration must be performed when media and ribbon (if used) are first installed in the printer, or if a different type of media or ribbon is being used.
7HDU2II0RGHRefer to Figure 15.
1.Open the printhead.
2.Slide the media guide and media supply guide as far from the printer frame as possible.
3.Load media as shown.
4.Slide in the media guide and media supply guide so they just touch, but don’t restrict, the edge of the roll.
5.Close the printhead.
Figure 15
Bradyprinter | 27 |