If you are not placing the printer into operation immediately, repackage it using the original packing materials. The printer may be stored under the following conditions:
•Temperature:
•Relative humidity: 5% to 85%
0HGLDDQG5LEERQ5HTXLUHPHQWV
Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applications.
We STRONGLY RECOMMEND the use of
•Continuous roll media, fanfold media, or card stock with optional perforations and registration holes may be used.
•Printhead life may be reduced by the abrasion of exposed paper fibers when using perforated media.
•The ribbon MUST be as wide as or wider than the media being used. If the ribbon is narrower than the media, areas of the printhead are unprotected and subject to premature wear. (When printing in direct thermal mode, ribbon is not used and should not be loaded in the printer.)
2 | Bradyprinter |