3ULQW4XDOLW\3UREOHPV
*HQHUDO3ULQW4XDOLW\,VVXHV
Problem | Solution |
You are using an incorrect media and ribbon | Consult your authorized Brady distributor for information |
combination for your application. | and advice. |
|
|
The printer is set at the incorrect print speed. | For optimal print quality, set the print speed to the lowest |
| possible setting via ZPL II, the driver, or the software. |
|
|
The printer is set at the incorrect darkness | For optimal print quality, set the darkness to the lowest |
level. | possible setting via the front panel, the driver, or the |
| software. |
|
|
The printhead is dirty. | Clean the printhead according to the instructions on |
| |
|
|
There is light printing (or no printing) on the | The toggle pressure needs to be adjusted. Follow the |
left or right side of the label or the printed | printhead pressure adjustment instructions on page 70. |
image is not sharp. |
|
|
|
*UD\OLQHVRQEODQNODEHOVZLWKQRFRQVLVWHQWSDWWHUQ
Problem | Solution |
The printhead is dirty. | Clean the printhead according to the instructions on |
| |
|
|
/LJKWFRQVLVWHQWYHUWLFDOOLQHVUXQQLQJWKURXJKDOORIWKHODEHOV
Problem | Solution |
The printhead or platen roller is dirty. | Clean the printhead, platen roller, or both according to the |
| instructions on page 64. |
|
|
,QWHUPLWWHQWFUHDVHVRQWKHOHIWDQGULJKWHGJHVRIWKHODEHOV
Problem | Solution |
There is too much toggle pressure on the | Reduce the toggle pressure. See “Printhead Pressure |
printhead. | |
|
|
74 | Bradyprinter |