Introduction

M-Series User ’s Guide

 

 

of the printhead may be reduced by abrasion from exposed paper fibers when using perforated media.

Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applications. This is especially true if you’re operating in “ Peel-Off” mode, where these variables combine with label size, backing content, diecut depth, and even humidity to affect printer operation.

Warnings and Precautions

Installation

CAUTION: To ensure that the Brady M-Series Printer has proper cooling, do not place any padding or cushioning material on the back of, or underneath, the unit.

240 VAC Operation

CAUTION: Refer to Section 2 for instructions on configuring your printer for 240 VAC operation before connecting to a 240 VAC power source.

Use of Shielded Cable

CAUTION: Refer to the Interconnections Section.

Brady printers comply with FCC “ Rules and Regulations” , Part 15, Subpart J, for Class A Equipment, using fully shielded data cables. Use of unshielded cables may increase radiated emissions above the Class A limits and is not recommended.

Brady printers comply with international regulations governing radiated emissions when using fully shielded data cables. Use of unshielded cables may increase radiated emissions above the regulated limits.

1-4