CHAPTER 4 CONTROL PANEL

✒Note

∙Even if you set the resolution to 600 dpi in this mode, the printer may not be able to print large and complex full color files at 600 dpi because of insufficient memory. However, it automatically decreases the resolution to 300 dpi to print them. While the printer is printing in this mode, the display prompts “01 PR300 … .”

∙If the printer cannot print files even at 300 dpi, a “MEMORY FULL” error occurs. See “ TROUBLESHOOTING” in Chapter 6 .

∙This automatic resolution decrease function works with the page protection on. See also “ PAGE PROTECTION” in this chapter.

∙When you want to print large and complex full color data without decreasing the resolution, you should expand the memory capacity of the printer.

■CAPT Setting

When you select “CAPT SETTING,” you can use the Color Advanced Photoscale Technology (CAPT). This function offers photographic fine color on graphics. CAPT setting is available only in BR-Script 2 mode. This feature requires 24 MB of RAM to process large and complex full color printouts. When you set CAPT=ON, the high resolution control (HRC) setting is unavailable.

Display Message

Advanced Photoscale Technology

 

 

CAPT =ON

Color advanced photoscale technology

 

is effective.

CAPT =OFF

Cancel the color advanced photoscale

 

technology. (factory setting)

✒Note

In the PCL 5C mode, CAPT setting is always ON. It depends on the printer setting if the printer uses the function or not.

4–31