Brother HL-3400CN Series Font, Continue, Continue, Continue, Continue, CONTINUE MODE, SCALABLE FONT, FONT=LJ, FONT=ALL, CONTINUE=AUTO, CONTINUE=MANUAL

CHAPTER 4 CONTROL PANEL

CONTINUE MODE

If any recoverable error occurs, including “Toner Empty,” it can be cleared with the Continue button. The Continue button function is selected with this mode setting.

Display Message	Continue Mode
CONTINUE=MANUAL	Select the manual error recovery mode. Press
	the Continue button to clear errors.
	(Factory setting)
CONTINUE=AUTO	Select the auto error recovery mode. The
	printer automatically clears recoverable
	errors. You need not press the Continue
	button.
SCALABLE FONT

✒Note

The setting in this mode menu is effective only in the HP PCL5C mode. It does not appear in any other emulation modes.

Since this printer has many scalable fonts, some application programs may not be able to handle them correctly. When the HP PCL5C emulation mode has been selected, the printer may print a different font rather than the font you have selected with your program or a font selection command.

To cope with this font problem, you can restrict the font selection by using this setting as follows:

Display Message	Scalable Font
FONT=ALL	All scalable fonts for this printer can be
	selected with the font selection command.
	(Factory setting)
FONT=LJ	Scalable fonts for this printer other than the
	following can be selected with the font
	selection command: Atlanta, Bermuda
	Script, PC Brussels, Copenhagen, Germany,
	Portugal, Calgary, San Diego, and US
	Roman.

Even if you restrict the font selection as above, you can select among all the scalable fonts with the Font button. The setting in this mode menu merely restricts the font selection command from an application to avoid incorrect font selections.

4–45