Brother HL-3400CN Series TEST Button

CHAPTER 4 CONTROL PANEL

TEST Button

You can test the printer or print the list of fonts with the Test button. To do so, hold down the Shift button and press the Test button. You will then enter the test mode where you can test the printer or print the list of fonts.

To test the printer, follow these steps:

1. Press the Sel button to take the printer off-line.
2. Hold down the Shift button and press the Test button.
	When you enter test mode, the display shows the first test mode
	item.
3. Press the ▲ or ▼ button until the test mode you want appears
	on the display.
Display Message		Test Mode
DEMO PAGE		Prints the demonstration page.
TEST PRINT		Performs the printer test and prints the test
		pattern.
PRINT CONFIG		Prints the list of control panel settings you
		have configured for the printer as user
		settings.
PRINT FONTS I		Prints the list of internal or resident fonts.
PRINT FONTS C		Prints the list of optional fonts stored in the
		font card.
PRINT FONTS P		Prints the list of permanent download fonts.
exit		Exits from the test mode. The printer does
		not perform the test.

4–83