Brother HL-3400CN Series SAVE DATA, SAVE MACRO, PRIMARY FONT, DOWNLOAD FONT, SECONDARY FONT

CHAPTER 4 CONTROL PANEL

■Save

When you select “SAVE” and you press the Set button, you can enter the following sub-setting menus to save the macros and fonts in the installed card:

Display Message	Save Menu
SAVE DATA	Save data that the printer will receive and set its ID.
SAVE MACRO	Save a macro. This menu appears only in the HP
	PCL5C emulation mode.
PRIMARY FONT	Save the primary font selected with the Font button.
	This menu appears only in the HP PCL5C emulation
	mode.
SECONDARY FONT	Save the secondary font selected with the Font
	button. This menu appears only in the HP PCL5C
	emulation mode.
DOWNLOAD FONT	Save a download font. This menu appears only in the
	HP PCL5C emulation mode.

✒Note

If the capacity of the device becomes low while macros and fonts are being saved, the display shows the “DEVICE FULL” error message and they cannot be saved. Use a new device or delete unnecessary macros and fonts from the card. The DEVICE LIST displays the contents and the used capacity.

• Save Data

You can send data and save it on the devicce. In this mode, any kind of data such as PCL data, BR-Script 2 data and command strings can be saved. When you select “SAVE DATA” and you press the Set button, the display shows the guide menu.

The guide menu message prompts you to press the Set button again so that the printer exits from the data reception status when you have finished sending data.

Send the data from your computer and then press the Set button.

4–37