Brother HL-3400CN Series Note, Note, ✒Note, ✒Note, PAGE PROTECTION, necessary. (Factory setting), PROTECT=A4, PROTECT=OFF, PROTECT=AUTO, PROTECT=LEGAL, PROTECT=LETTER

CHAPTER 4 CONTROL PANEL

PAGE PROTECTION

✒Note

The setting in this mode menu is effective in the HP PCL5C, EPSON FX- 850, IBM Proprinter XL and HP-GL modes. It does not appear in the BR- Script 2 mode.

If print images are too complex to print, the printer may print them in parts or only on part of the page. If this occurs, the printer loses print data and shows a message on the LCD panel.

The page protection function reserves additional memory so that the printer can create the entire page image in memory before physically printing it. This function can be set for 330 x 483mm (13"x19"), Ledger, letter, A3, A4 or legal size paper. Select the paper size for page protection.

Display Message	Page Protection
PROTECT=AUTO	Page protection on only when it is
	necessary. (Factory setting)
PROTECT=LETTER	Page protection on for letter size
	paper.
PROTECT=A4	Page protection on for A4 size paper.
PROTECT=LEGAL	Page protection on for legal size paper.
PROTECT=OFF	Page protection off

To protect pages, your printer will need the minimum memory shown in the following table:

Protection	600 dpi Color
Off	16 Mbytes
Letter or A4	20 Mbytes
Legal	24 Mbytes

✒Note

When you use the page protection function, note the following:

∙If the function setting is changed, all download fonts and macros— including permanent ones—are cleared. If the memory is too low to protect pages, page protection does not take effect.

4–33