Brother HL-3400CN Series DEVICE1 FONT, DEVICE2 FONT, DEVICE3 FONT, INTERNAL FONT, PERMANENT FONT

CHAPTER 4 CONTROL PANEL

To select the font and symbol set in the HP PCL5C mode, follow these steps:

1.Press the Sel button to take the printer off-line.

2.Press the Font button and then press the ▲ or ▼ button to select the primary or secondary font setting menu.

3.Press the Set button.

The display shows the font setting menu. You can skip the font setting menu and advance to the symbol set setting menu with the ▲ or ▼ button.

✒Note

The last lowercase letter “p” or “s” indicates the primary or secondary font setting mode. If you select the secondary font setting mode, the display shows “s” in the following messages.

4. Press the Set button.

	When you enter the “SELECT FONT” menu, you can select
	the internal font, optional slot font or permanent download
	font.
	Press the ▲ or ▼ button until the desired font source appears
	on the display.
Display Message		Font Source
INTERNAL FONT		Internal font of the printer
DEVICE1 FONT		Optional card font in slot 1
DEVICE2 FONT		Optional card font in slot 2
DEVICE3 FONT		Optional HDD
PERMANENT FONT		Permanent download font defined in the HP emulation mode
	Since these steps instruct you how to select the standard font,
	select the “INTERNAL FONT” message.

✒Notes

When you select the optional fonts or permanent download fonts, note the following:

∙If the optional font cartridge/card is not installed, the optional font cannot be selected. No selection appears on the display.

∙If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, they cannot be selected. No selection appears on the display.

∙The list you can print with the Test button helps you to select the optional fonts or permanent download fonts. See “ TEST button” in this chapter or “ Selecting the Optional Fonts” in Chapter 5 .

4–51