USER’S GUIDE

DEVICE OPERATION

✒Notes

∙BE SURE TO TURN OFF THE PRINTER POWER BUTTON BEFORE INSTALLING OR REMOVING A FLASH MEMORY CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED.

∙Settings in this mode are effective only when you have installed a flash memory card, an HDD card or optional HDD and you have selected PCL5C, HP-GL, or BR-Script 2. They will not appear if the printer does not have a card or HDD installed or if it is in another emulation mode.

∙If you turn the printer off or remove the flash memory card or HDD card while data is being written onto or deleted from the card, all the data on the card may be lost.

∙If the write protect button of the flash memory card or HDD card is on, this mode menu does not appear.

∙An HDD card will only fit into slot 2.

Be sure to install a commercial flash memory card or HDD card in the correct card slot of the printer.

When you are in this mode menu, you can save macros and fonts in the installed flash memory card or the HDD card.

The sub-setting menus displayed in this mode will vary according to the status of the installed card.

Display Message

Card Operation

DEVICE 1

Select Card 1.

DEVICE

2

Select Card 2.

DEVICE

3

Select optional HDD.

When two cards are installed, you can select the card that you want to operate.

When the installed flash memory or HDD card is not formatted:

The flash memory card or HDD must be formatted by the printer before using the card. When you enter this mode, the display shows the following message:

4–34