CHAPTER 5 MAINTENANCE

3.Select the font with the Font button. See “FONT button” in Chapter 4 .

Network Option

Modular I/O Card

Before installing an NC-2010h/2100h Network card, please note the following information.

Before NC-2010h/2100h Installation

(USA)

When you install the NC-2010h/2100h Ethernet interface card, this printer complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

Please refer to the NC-2010h/2100h User’s Guide for the FCC notice.

(CANADA)

When you install the NC-2010h/2100h Ethernet interface card, this printer complies with the limits for a Class A digital apparatus, pursuant to Canadian Interference-Causing Equipment Regulations.

(Europe)

When you install the NC-2010h/2100h Ethernet interface card, this printer complies with EN 55022 Class A.

Warning

In a domestic environment, the printer used with an NC-2010h/2100h Network card may cause radio interference, in which case the user may be required to take adequate measures to prevent any such interference.

This printer has a modular input/output (MIO) interface slot on the rear panel. This slot allows you to install a commercial MIO-compatible sharing/network card.

For more information about MIO cards, consult the dealer where you purchased this printer.

Because the NC-3100h is installed on this printer, you have to remove the

NC-3100h first to install an MIO card.

When you install the MIO card, follow these steps:

1. Turn off the printer and unplug the power cord from the wall socket.

✒Note

∙Be sure to turn off the power to the printer before installing or removing the MIO card.

∙Be sure to remove the interface cable connector when installing the

MIO card.

5-53