Brother HL-3400CN Series Mode, Proprinter XL Modes, MODE Button Settings in HP PCL5C, EPSON FX-850,and IBM

CHAPTER 4 CONTROL PANEL

MODE Button Settings in HP PCL5C, EPSON FX-850, and IBMProprinter XL Modes

The following table shows all the selections you can choose with the Mode button in the HP PCL5C, EPSON FX-850 and IBM Proprinter XL modes.

✒Note

The mode menus and settings that appear will vary according to the current emulation mode, printer status and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu	Setting
INTERFACE MODE	I/F=PARALLEL	HIGH SPEED=ON	ON or OFF
		BI-DIR=ON	ON or OFF
		exit	Exit to INTERFACE MODE
	I/F=RS-232C	BaudRate= 9600	150, 300, 600, 1200, 2400, 4800,
			9600, 19200, 38400, 57600, or
			115200 baud
		CodeType=8 bits	7 or 8 bits
		Parity =NONE	NONE, EVEN, or ODD
		Stop Bit=1 bits	1 or 2 stop bits
		Xon/Xoff=ON	ON or OFF
		DTR (ER)=ON	ON or OFF
		Robust Xon=OFF	ON or OFF
		exit	Exit to INTERFACE MODE
	I/F=EXPAND I/O	Available only when a commercial MIO card has been
		installed.
		MIO Setting	The settings available on the
			installed MIO card can appear
			under the sub-setting menu.
		Exit	Exit to INTERFACE MODE
	I/F=AUTO	TIME OUT= 5s	1 to 99 seconds
		PRL Setting	Bi-directional settings for AUTO
		HIGH SPEED=ON	ON or OFF
		BI-DIR=ON	ON or OFF
		exit	Exit to PRL Setting
		RS-232C Setting	Parameters for AUTO mode
		BaudRate= 9600	150, 300, 600, 1200, 2400, 4800,
			9600, 19200, 38400, 57600, or
			115200 baud
		CodeType=8 bits	7 or 8 bits
		Parity =NONE	NONE, EVEN, or ODD
		Stop Bit=1 bits	1 or 2 stop bits
		Xon/Xoff=ON	ON or OFF
		DTR (ER)=ON	ON or OFF
		Robust Xon=OFF	ON or OFF
		exit	Exit to RS-232C Setting

4–9