CHAPTER 2 SETTING UP THE PRINTER

Turning the Printer OnInstalling the Power Cord and Turning the Printer On

1.Make sure that the Power button is turned OFF. The power button is on the front left side of the printer.

2.Attach the power cord to the printer and plug it into an appropriate AC outlet.

Fig. 2-25 Plugging in the Power Cord

3. Turn the printer ON by pressing the Power Button.

!Caution

∙Check the AC voltage. This printer should be operated at the specified voltage and frequency.

• USA and Canada:

AC 120 V, 50/60 Hz

• Europe, Australia and others:

AC 220 to 240 V, 50/60 Hz

∙Since this printer must be electrically grounded, the power cord should be connected to a grounded AC outlet.

∙The total length of the power cord, including extension cords, should not exceed 5 metres (16.4 feet). Use of a longer power cord may result in reduced voltage or malfunctions.

∙Do not unplug the power cord to turn off the printer.

∙The printer should be installed near a power outlet that is easily accessible.

2–19