CHAPTER 4 CONTROL PANEL

You can check the fonts saved on the card by printing the list of fonts with the Test button. See “ TEST Button” in this Chapter.

✒Note

When the fonts on the HDD card are selected in a print job, they are copied into the printer RAM. It may cause a printer memory full error because those fonts occupy some RAM space. We recommend that you install optional DIMM memory to use the downloaded fonts on the HDD card.

■Delete

When you select “DELETE” and press the Set button, you can enter the following sub-setting menus to delete macros and fonts or format the installed flash memory card or HDD card:

Display Message

Delete Menu

MACRO ID=#####

Delete the selected ID macro.

DATA ID=#####

Delete the selected ID data.

 

 

FONT ID=#####

Delete the selected ID font.

 

 

FORMAT DEVICE

Format the flash memory card, HDD card

 

or optional HDD.

• Macro

 

When you press the Set button at “MACRO ID=#####,” the cursor moves to the ID number. The printer prompts you to select the ID number of the macro to be deleted.

Select the ID number with the ▲ or ▼ button and press the Set button, so the printer deletes the selected macro.

• Data

When you press the Set button at “DATA ID=#####,” the cursor moves to the ID number. The printer prompts you to select the ID number of the data to be deleted.

Select the ID number with the ▲ or ▼ button and press the Set button, so the printer deletes the selected data.

• Font

When you press the Set button at “FONT ID=#####,” the cursor moves to the ID number. The printer prompts you to select the ID number of the font to be deleted.

Select the ID number with the ▲ or ▼ button and press the Set button, so the printer deletes the selected font.

4–41