Brother HL-3400CN Series FEEDER, FEEDER Button, auto paper feed, Auto paper feed, Feeder, MEDIA TYPE, FEEDER=AUTO, DUPLEX MODE, the display, FEEDER=AUTO, FEEDER=TRAY1, FEEDER=TRAY2

CHAPTER 4 CONTROL PANEL

FEEDER ButtonYou can select the feeder and manual feed mode with the Feeder button.

Display Message	Feeder
FEEDER=AUTO	Select a feeder or auto paper feed.
MANUAL MODE=ON	Enable/disable the manual feed mode.
MEDIA TYPE	Select print media
DUPLEX MODE	Select duplex printing mode (only with the
	DX-3400 duplex unit installed)

You can check the current feeder and the duplex mode on the display.When tray1 has been selected, the display shows the following message.00 READY 001P T1

When the multi-purpose tray and the duplex printing mode have been selected, the display shows the following message.

00 READY 001P■T1The black square ■ indicates that the duplex printing mode is selected.

When you want to change settings with the Feeder button, hold down the Shift button and press the Feeder button. You will then enter the setting mode where you change the feeder, manual feed mode, etc.

FEEDERTo select the feeder, follow these steps:

1. Press the Sel button to take the printer off-line.
2. Hold down the Shift button and press the Feeder button.
	When you enter the setting mode, the display first shows the
	current feeder setting with the asterisk.
3. Press the ▲ or ▼ button until the feeder you want appears on
	the display.
Display Message	Paper Feed Method/Paper Source
FEEDER=AUTO	Auto paper feed
FEEDER=TRAY1	Upper Media Cassette (Tray 1)
FEEDER=TRAY2	Optional Lower Media Cassette (Tray 2)
FEEDER=TRAY3	Optional Lower Media Cassette (Tray 3)

4–69