Brother HL-3400CN Series Notes, ✒Notes, Antique, Regular, Roman, Book, or

CHAPTER 4 CONTROL PANEL

✒Notes

When you select the optional fonts or permanent download fonts, note the following:

∙If the optional font card is not installed, the optional font cannot be selected. No selection appears on the display.

∙If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, the permanent fonts cannot be selected. No selection appears on the display.

∙When you select the optional font or download font, press the Set button to enter the sub-menu. After you select your desired font with the ▲ or ▼ button, press the Set button again. The list you can print with the Test button helps you to select the optional fonts or permanent download fonts. See “ TEST button” in this chapter or

“ Selecting the Optional Fonts” in Chapter 5.

4.Press the Set button.

When you enter the font setting mode, the display first shows the current font with an asterisk.

5.Press the ▲ or ▼ button until the font you want appears on the display.

See “List of Fonts”.

6.Press the Set button to make the displayed selection effective. The steps you follow will vary according to the font type, scalable or bitmapped.

■If you select a resident bitmapped font (Letter Gothic 16.66) or optional bitmapped fonts, the display shows the character set selection menu.

Go to step 7.

■If you select the resident scalable fonts or optional scalable fonts, the display shows the font style selection menu and then changes to the font size menu.

7.Press the ▲ or ▼ button until the desired style appears on the display.

Display Message	Font Style
Lt	Light
Reg	Regular, Roman, Book, or
	Antique
Bd	Bold or Demi
Xb	Extrabold
It	Italic or Oblique

4–55