Brother HL-3400CN Series Set, Set, Notes, Reset, ✒Notes, LCD message, LCD Message, Selected Mode, Parts replaced, List of Factory Settings

CHAPTER 4 CONTROL PANEL

4.Press the Set button to make the displayed selection effective. The printer is reset according to the selected reset mode.

Selected Mode	LCD message
RESET PRINTER	08 RESET TO ↔USER SETTINGS
RESET SETTING 1-2	08 RESET TO ↔SETTING # 1*
FACTORY SETTINGS	09 RESET TO ↔FACTORY
	SETTINGS

1* - # indicates the selected number of saved settings

The printer automatically exits from the reset mode to the online state.

5. When you enter the RESET PARTS LIFE mode:

LCD Message	Parts replaced
FC ROLLER	Fuser Cleaner
OPC BELT	(OPC) Belt Cartridge
FUSER UNIT	Fixing Unit
240K KIT	Drum Cleaner, Paper Discharge,
	Transfer Roller

The reset item is selected according to the Maintenance message that shows the currently recommended part to replace. Press Set to reset the parts life. See Chapter 5 for more detailed information.

List of Factory Settings

The following table shows the factory settings made before shipment.

✒Notes

∙The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table.

∙The following settings cannot be restored to the factory settings with the Reset button in the “FACTORY SETTINGS” mode:

INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local LANGUAGE for display messages.

∙The COPY setting is always restored to the factory setting when the printer is turned off and on again.

∙The user settings are overwritten after resetting to User Settings 1 or 2.

4–75