Brother HL-3400CN Series manual 81

USER’S GUIDE

Mode Menu (Continued)		Setting Menu	Sub-Setting Menu		Setting
INTERFACE		I/F AUTO	MIO Setting		Available only when a commercial
MODE		(Continued)			MIO card has been installed. The
(Continued)					settings available on the installed
					MIO card can appear under the sub-
					setting menu.
FORMAT MODE		ORIENTATION	ORI=PORTRAIT		PORTRAIT or LANDSCAPE
		AUTO MODE	AUTO LF=OFF		ON … LF + CR
					OFF … CR only
			AUTO CR=OFF		ON … LF, FF, or VT + CR
					OFF … LF, FF, or VT only
			AUTO WRAP=OFF		ON … Auto wrap on
					OFF … Auto wrap off
			AUTO SKIP=ON		ON … Auto FF at bottom margin
			(HP mode)		OFF … No FF at bottom margin
			AUTO MASK=OFF		ON … Auto mask on
			(EPSON & IBM modes)		OFF … Auto mask off
			exit		Exit to AUTO MODE
		PAGE FORMAT MODE	PAPER =LETTER		330x482mm(13"X19"), LEDGER,
			(For 120V model)		LETTER, LEGAL, A3, A4, A5, B4,
			PAPER =A4		B5, EXECUTIVE, JIS B5,
			(For 220/240V model)		COM10, C5 and DL
			LEFT M = 0C		0 to 126 columns
			RIGHT M = 80C		10 to 136 columns
			(Letter, Portrait)
			RIGHT M = 78C		10 to 136 columns
			(A4, Portrait)
			TOP M =0.5” (HP mode)		0, 0.33, 0.5, 1.0, 1.5, or 2.0”
					(0,8.4, 12.7, 25.4, 38.1 or 50.8 mm)
			BOTTOM M=0.5”		0, 0.33, 0.5, 1.0, 1.5, or 2.0”
			(HP mode)		(0,8.4, 12.7, 25.4, 38.1 or 50.8 mm)
			LINES = 60L		5 to 128 lines/page
			(HP, Letter, Portrait)
			LINES = 64L		5 to 128 lines/page
			(HP, A4, Portrait)
			X OFFSET= 0		-500 (left) to +500 (right) dots
			Y OFFSET= 0		-500 (down) to +500 (up)
					dots
			exit		Exit to PAGE FORMAT MODE
		COLOR MODE	COLOR PRINT =		ON...Enable color printing
			ON		OFF...Monochrome print mode
		exit			Exit to FORMAT MODE
RESOLUTION MODE		RESOLUTION	RESOLUTION		300 or 600 dpi
		HRC SETTING	HRC=MEDIUM		OFF, LIGHT, MEDIUM, or DARK
		exit			Exit to RESOLUTION MODE
PAGE PROTECTION		PROTECT=AUTO			AUTO, OFF, LETTER, A4, or
					LEGAL
DEVICE OPERATION		When the commercial flash memory card, HDD card or optional HDD has not been formatted:
(HP mode only) FORMAT DEVICE				Format the flash memory card, the HDD
DEVICE1				card or optional HDD.
DEVICE2
DEVICE3
	exit
		exit		Exit to DEVICE OPERATION

4–10