CHAPTER 4 CONTROL PANEL

COPY Button

You can set the number of copies to print of the same page with the Copy button. The job will print faster than choosing the copy print quantity from within your application software. Check the current setting on the display.

When the number of copies has been set to 3, the display may look as follows:

LJ READY 003P T1

AUTO

✒Note

If you send too many pages to be stored in the printer memory, part or all of the set of pages or copies may not be printed.

To set the number of copies, follow these steps:

1.Press the Sel button to take the printer off-line.

2.Hold down the Shift button and press the Copy button.

When you enter the setting mode, the display first shows the current setting with the asterisk.

3. Press the ▲ or ▼ button until the desired number appears on the display.

Display Message

# of Copies to Print Same Pages

COPY PAGES=

1

1 page

COPY PAGES=

2

2 pages

...

 

. . .

COPY PAGES=999

999 pages (max.)

4.Press the Set button to make the displayed selection effective. For a short time an asterisk appears at the end of the display. The printer then automatically exits from the setting mode to the off-line state.

4–73