Brother HL-3400CN Series MODE Button Settings in BR-Script2 Mode, Mode button in the BR-Script2 mode, The following table shows all the selections you can choose with the

CHAPTER 4 CONTROL PANEL

MODE Button Settings in BR-Script 2 ModeThe following table shows all the selections you can choose with theMode button in the BR-Script 2 mode.

✒Note

The mode menus and settings that appear will vary according to the current emulation mode, printer status and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu	Setting
INTERFACE MODE
Same as HP PCL5C Mode

FORMAT MODE	PAGE FORMAT MODE PAPER=LETTER
	(For 120V model)
	PAPER=A4
	(For 220/240V model)

LETTER, LEGAL, A4, A5, B5,

JIS B5, EXECUTIVE, COM10, C5 and DL

			X OFFSET=0		-500 (left) to +500 (right) dots
			Y OFFSET=0		-500 (down) to +500 (up) dots
			exit		Exit to PAGE FORMAT MODE
		COLOR MODE	Same as PCL5C mode
		exit			Exit to PAGE FORMAT MODE
RESOLUTION MODE		RESOLUTION	RESOLUTION=600		300 or 600 dpi
		CAPT SETTING	CAPT=ON		ON or OFF
		HRC SETTING	HRC=MEDIUM		OFF, LIGHT, MEDIUM, or DARK
		exit			Exit to RESOLUTION MODE
DEVICE OPERATION		When the commercial flash memory card or the HDD card has not been formatted:
		FORMAT DEVICE			Format the flash memory card,
	DEVICE1				HDD card or optional HDD.
	DEVICE2
	DEVICE3
	exit
		Exit			Exit to DEVICE OPERATION
DEVICE OPERATION		When the commercial flash memory card, HDD card or optional HDD has been formatted:
	DEVICE1 EXECUTE DATA				Execute the data on the card.
	DEVICE2
			DATA ID=#####		Execute the selected data.
	DEVICE3
		DEVICE LIST			Print the contents of the device.
		SAVE	SAVE DATA		Send data to be saved.
				SET KEY--> END	End saving the data.
				DATA ID=#####	Set data ID for saved data.
			Exit		Exit to DEVICE OPERATION
		DELETE	MACRO ID=#####		Delete the selected macro.
			DATA ID=####		Delete the selected data.
			FONT ID=#####		Delete the selected font.
			FORMAT DEVICE		Format the device.
				SET –> DELETE ALL	Execute formatting the device.
				Exit	Exit to FORMAT DEVICE
		exit			Exit to DEVICEOPERATION

4–13